机动目标一维距离像RAT法线性化补偿

研究了机动目标宽带线性调频脉冲回波全去斜率信号模型,根据速度和加速度的调频频谱展宽特点,提出了机动目标宽带一维距离像线性化调频回波模型,给出了Radon模糊图转换(RAT)法线性参数估计与运动补偿方法,并进一步分析了测速和测距误差.仿真实验验证了RAT法一维距离像线性化参数估计与补偿,表明该方法很好地解决了运动参数未知情况下机动目标的一维距离像频谱展宽问题.     

阵列雷达自适应多零点单脉冲群目标测角算法

针对阵列体制雷达，由极大似然估计导出自适应多零点单脉冲测角原理。分析发现迭代步长过大导致双零点单脉冲技术在多目标条件下失效，因此提出加权步长改进角度估计的迭代过程，只需要较少计算量就能实现群内多个目标的精确测角。仿真结果表明：该算法在较高信噪比条件下可以精确测量群内三个目标角度，测角误差约为0.15倍波束宽度；当群目标数较多或者目标相位差接近于0时，算法性能下降明显。     

装备剩余寿命预测平行仿真中模型动态演化方法

装备平行仿真中的一个重要概念是实时数据驱动的模型动态演化,但是至今仍缺乏具体应用领域的实现方法。以带未知离散冲击的混合退化装备剩余寿命预测为背景,以多态Wiener状态空间模型为演化对象,提出一种装备平行仿真中模型动态演化方法,包括基于交互多模型强跟踪滤波的模型软切换和基于期望最大化算法的模型参数在线估计,并实现了基于平行仿真的装备剩余寿命实时预测。利用某轴承退化数据进行实例研究,结果表明该方法能有效提高仿真逼真度,剩余寿命预测的准确度较高、不确定性较小,具有较高工程应用价值。     

辐射传热时活塞式气缸中加热气体的最大膨胀功

对热辐射传热定律q∝Δ(T4)下,给定初态内能、体积,末态体积以及过程时间时,加热气体膨胀的最优构型进行了研究,利用最优控制理论得出最大膨胀功输出时膨胀的最优构型由两个瞬时绝热分支和一个E-L分支组成的结论.给出了各分支之间转换点参数的求解方法及最优构型的数值算例,最后将线性唯象传热定律、牛顿传热定律、平方传热定律、立方传热定律和辐射传热定律下加热气体膨胀的最优构型进行了比较.结果显示,随着传热指数的增加,理想气体的内能呈现出明显的整体增加趋势,而体积则呈现出明显的整体减小趋势.     

一种改进方位向非线性CS大斜视角SAR成像算法

大斜视角SAR成像时存在严重的距离走动现象,慢时域的距离走动校正在解决这一问题同时导致了聚焦深度问题.分析了二维频域解耦合后残余相位误差以及时域走动校正后的多普勒调频率误差,提出一种改进的方位向非线性CS算法,校正了三次以上距离迁徙带来的相位误差,同时采用改进非线性CS扰动方程补偿了随方位偏移量线性变化的调频率误差.仿真结果表明,改进算法的大斜视角大场景成像性能优于传统的高分辨大斜视角成像算法.     

LFM脉冲雷达距离维快速搜索处理算法

针对脉冲雷达近距离目标遮挡问题,从理论上分析了雷达最小作用距离不受限于脉冲宽度.在此基础上,以Chirp脉冲为例,提出了一种适合远近距离全程目标的快速搜索处理算法.该算法只需发射一种宽脉冲波形,而不必根据距离的变化改变脉宽,从而有效缩短了搜索时间,大大提高了搜索效率.仿真结果表明了理论分析的正确性和算法的有效性.     

压制火控系统中有关最大射程角的应用探讨

通过对实际应用中,压制火控系统射击诸元中有关最大射程角的具体使用进行了分析,提出了在地面压制武器系统外弹道中距离-射角函数可能出现多个极点的观点,并给出了最大射程角具体计算方法,在火控系统的工程实践中提高了武器系统的性能。     

A model for step‐stress accelerated life testing

Modern technology is producing high reliability products. Life testing for such products under normal use condition takes a lot of time to obtain a reasonable number of failures. In this situation a step‐stress procedure is preferred for accelerated life testing. In this paper we assume a Weibull and Lognormal model whose scale parameter depends upon the present level as well as the age at the entry in the present stress level. On the basis of that we propose a parametric model to the life distribution for step‐stress testing and suggest a suitable design to estimate the parameters involved in the model. A simulation study has been done by the proposed model based on maximum likelihood estimation. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2003     

反空空导弹的导引头研究

从反空空导弹的导引头对空空导弹的最大探测距离方面论述了其不适宜采用雷达导引头的原因,并指出了反空空导弹可采用红外导引头来跟踪空空导弹的可能性。同时又分析了空空导弹的红外辐射特性,说明了反空空导弹红外导引头探测器响应工作波段应为3μm～5μm。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008